|
|
IVT FMC O200 Mobile Phone
This fashionable and elegant mobile phone will lead you to enjoy a new experience of Bluetooth connectivity to PSTN network and IP network. The O200, an aggregate of GSM/GPRS and wireless telephone, can automatically recognize and connect to a Bluetooth Access Point (AP), and act as the cordless phone of the AP. User can use O200 to make an outgoing call or answer an incoming call anywhere in the range of 500 meters (in open area) of the AP at cost of the PSTN call or IP call! Also, user can make an intercom call between two O200 for free. The O200 is a wonderful design, will bring you easy communication, entertainment and highlighting your taste.
|
Download IVT_FMC_mobile_O200 Datasheet
|
Bluetooth CTP Supported Mobile Phone
The Bluetooth CTP application provides the GSM Mobile Phone cordless phone function. When the mobile phone enters into the range of the CTP enabled Access Point (AP), it can connect to the AP through Bluetooth and then act as the cordless phone of the AP. User can use O200 to make an outgoing call or answer an incoming call anywhere in the range of AP through PSTN network or IP network.
The Mobile Phone must be connected with the AP before using the function. Once connected, the connecting information will be stored in the AP, unless remove it. Generally, connecting the mobile phone with the AP manually just one time, after that, the mobile phone will connect to the AP automatically, if the Bluetooth connection lost.
|
|
-
Bluetooth ICP Supported Mobile Phone
The Bluetooth ICP application provides interphone function. As an interphone, user can make a call in 500 meters (in open area) between the two mobile phones.
Bluetooth HFP Supported Mobile Phone
The Bluetooth HFP application provides the GSM Mobile Phone Audio Gateway function. As an Audio Gateway, user can use a Bluetooth headset to dial or answer a GSM call.
The Mobile Phone must be connected with the Headset before using the function. Once connected, the connecting information will be stored in the Headset, unless remove it. Generally, connecting the mobile phone with the Headset manually just one time, after that, the mobile phone will connect to the Headset automatically, if the Bluetooth connection lost.
- Search Bluetooth Access Points/Headsets
- Connect to Bluetooth Access Point/Headsets Manually
- Connect to Bluetooth Access Point/Headsets Automatically
- Disconnect from Bluetooth Access Point/Headsets
- Dial out or answer a call through the Bluetooth Access Point.
- Receive the Caller ID from Bluetooth Access Point, and show to user
- Indication of signal strength and Low signal strength alarm
- Indication of call type
The mobile phone can indicate user the call type, whether the call is via GSM network or Bluetooth.
|
Bluetooth Parameters |
Profile Supported |
CTP(Cordless Telephony Profile)
GAP(Generic Access Profile)
SDAP(Service Discovery Application Profile)
ICP(Intercom Profile)
HFP(Hands Free Profile)
HSP(Headset Profile) |
Specification Version |
Compliant with Bluetooth SIG Specification V1.1, V1.2 and V2.0 |
Radio interface |
2.4GHZ air Interface |
Radio Class |
Class1/Bluetooth Extended Range |
Maximum rate |
Bluetooth EDR 3Mbps |
Transmit distance |
500 meters(in open area) |
Transmit power |
18dBm |
Transmit mode |
Point to Multi-points |
Work Temperature |
0-70°C |
|
|
